EASTER BUNNY QUILT

INSTRUCTIONS

CUTTING

Cutting Instructions

Please note:All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

WOF= Width of Fabric,LOF = Length of Fabric

Fabric A (3900P-10 36" Happy Spring Panel - Multi):

• Fussy cut (1) 35 1/2" x 43" panel.

Fabric B (3904-22 Buzzing Bees - Pink), cut:

• (5) 2" x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2" x 43" strips and (2) 2" x 38 1/2" strips.
• See instructions to cut (4) eggs.

Fabric C (3904-60 Buzzing Bees - Green):

• See instructions to cut (5) eggs.

Fabric D (3905-1 Chicks and Eggs - White):

• See instructions to cut (5) eggs.

Fabric E (3902-1 Decorative Eggs - White):

• See instructions to cut (5) eggs.

Fabric F (3907-10 Jelly Beans - Multi):

• See instructions to cut (5) eggs.

Fabric G (3905-11 Chicks and Eggs - Blue):

• See instructions to cut (4) eggs.

Fabric H (1351-Grape Just Color! - Grape), cut:

• (3) 1 1/2" x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 1/2" x 53" strips.
• (3) 1 1/2" x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 1/2" x 47 1/2" strips.
• (6) 2 1/2" x WOF strips for the binding.

Fabric I (1351-Pigment White Just Color! - Pigment White), cut:

• (3) 4 1/2" x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4 1/2" x 45"strips.
• (3) 4 1/2" x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4 1/2" x 45 1/2" strips.

Fabric J (3901-10 Spring Bunnies - Multi), cut:

• (2) 3 1/2" x 55" LOF strips.
• (2) 3 1/2" x 53 1/2" WOF strips from the remaining fabric, piece as needed.

Backing (3902-50 Decorative Eggs - Lilac), cut:

• (2) 61" x WOF strips. Sew the strips together and trim to 61" x 69" for the back.

SEWING

Sew using a 1/4" seam allowance with right sides together (RST) unless otherwise indicated. Always press towards the darker fabric while assembling, unless otherwise noted by the arrows.

BLOCK ASSEMBLY

Step 1. Sew (1) 2" x 43" Fabric B strip to each side of the 35 1/2" x 43" Fabric A panel. Sew (1) 2" x 38 1/2" Fabric B strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 37 1/2" x 45" to make the Center Block (Fig. 1).

Step 2. Following the manufacturer's instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8" outside the drawn lines.

Step 3. Press each template onto the wrong side of the fabrics as listed on the templates. Cut out each template on the drawn lines.

Step 4. Refer to the Figure 2 to arrange and press (7) assorted eggs onto (1) 4 1/2" x 45 1/2" Fabric I strip.

Step 5. Finish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make the Top Border.

Step 6. Repeat Steps 4-5 and use Figure 3 for fabric identification and location to make (1) Bottom Border (Fig. 3).

Step 7.Refer to Figure 4 and repeat Steps 4-5, using (1) 4 1/2" x 45" Fabric I strip and (7) assorted eggs to make the Left Side Border.

Step 8.Refer to Figure 5 and repeat Steps 4-5, using (1) 4 1/2" x 45" Fabric I strip and (7) assorted eggs to make the Right Side Border.

QUILT TOP ASSEMBLY

(Follow the Quilt Layout while assembling the quilt top)

Step 9.Sew the Left and Right Side Borders to the Center Block. Sew the Top and Bottom Borders to the Center Block.

Step 10.Sew (1) 1 1/2" x 53" Fabric H strip to each side of the Center Block. Sew (1) 1 1/2" x 47 1/2" Fabric H strip to the top and to the bottom of the Center Block.

Step 11.Sew (1) 3 1/2" x 55" Fabric J strip to each side of the Center Block. Sew (1) 3 1/2" x 53 1/2" Fabric J strip to the top and to the bottom of the Center Block to make the quilt top.

LAYERING, QUILTING AND FINISHING

Step 12.Press the quilt top and 61" x 69" backing well Layer backing (wrong side up), batting, pressed quilt top (right side up) and baste. Quilt as desired and trim excess batting and backing when quilting is complete.

BINDING

Step 13.Cut the ends of the (6) Fabric H binding strips at a 45-degree angle and sew end to end to make (1) continuous piece of binding. Fold in half lengthwise and press wrong sides together.

Step 14.Sew the binding to the front of the quilt, raw edges together. Turn the folded edge to the back, and hand stitch in place.