TIMBER BEACH SIGN

Timber Beach Sign Project

LEVEL: EASY

WHAT YOU'LL NEED:

  • 3 x Francheville timber signs
  • Arcyrlic paints - white, blue and black.
  • Sponge
  • Water
  • Small paint brush
  • Wooden beads x 4

INSTRUCTIONS:

Step 1 - Pour a small amount of paint onto each timber panel and using water and the sponge spread the paint across the timber to give a washed effect. You can mix the white and blue beforehand or while it's on the timber with the sponge. Leave to dry.

Step 2 - Once the paint is dry on each timber panel use a pencil to light draw on your letters to spell out a saying of your choice. Use different fonts on each one to create an interesting design.

Step 3 - Using the fine paint brush and the black and white paint, paint over your pencil design carefully.

Step 4 - Once all the paint is dry you can assemble your boards. Using scissors cut the hanging cord of your bottom 2 panels and thread some of the wooden beads through the cord. Then tie the cords to the board above until they are all attached.

Step 5 - Hang to finish!

altText

BECOME A SPOTLIGHT VIP

Get VIP discounts, attend exclusive events and more