TRADITIONAL FILLABLE BAUBLES

Instructions:

Step 1- Cut the stems off the fake pinecones and gold berries. Place inside the opened bauble.

Step 2- Apply a thin layer of Helmar 450 glue to the rim of the bauble. Put the halves back together, allow to dry.

Golden Ball Baubles:

What you'll need:

• Jolly & Joy DIY 8cm Fillable Bauble 4 Pack Clear 8 cm
• Jolly & Joy Glitter Berry Pick Gold

Instructions:

Step 1- Remove silver cap from the top of the bauble. Place desired amount of golden balls inside the bauble.

Step 2- Carefully replace cap.

Gold and Silver Leaf Baubles:

What you'll need:

• Jolly & Joy DIY 8cm Fillable Bauble 4 Pack Clear 8 cm
• Mod Podge
• Gold Leaf
• Silver Leaf
• Tweezers

Instructions:

Step 1- Remove silver cap from the top of the bauble. Insert a small amount of Mod Podge into the bauble, swirl it around to make sure the bauble is completely covered.

Step 2- Use tweezers to insert gold leaf and silver leaf to the inside of the bauble.

Step 3- Carefully replace cap.

Tinsel and Vinyl Baubles:

What you'll need:

• Jolly & Joy Fillable Christmas Mason Jar 4 Pack Clear
• Cheering Pom Poms Red
• Cricut Machine
• Cricut permanent Vinyl
• Cricut weeding tool
• Cricut transfer tape
• Tweezers

Instructions:

Step 1- Remove base of the bauble. Cut strips from tinsel cheerleading pompoms and fill the bauble.

Note: You can use tweezers or long nose pliers to help get the tinsel in the bauble.

Step 2- Use Cricut design space to create your design.

Step 3- Use a Cricut machine to cut the design from permanent vinyl.

Step 4- Weed out the vinyl that you don't need (inside of the letters and around the letters). Apply transfer tape.

Step 5- Apply the vinyl to the bauble. Remove the transfer tape.

Step 6- Replace base of the bauble.

Gingerbread Man Glitter Bauble:

What you'll need:

• Jolly & Joy DIY Fillable Plastic Baubles Clear
• Glitter
• Gingerbread Man ornaments
• Helmar 450 glue
• Hot glue gun and glue sticks

Instructions:

Step 1- Open the bauble and put one half face up.

Step 2- Fill with desired amount of glitter.

Step 3- Use hot glue to secure the Gingerbread Man ornaments ribbon to the bauble inner top edge of the bauble.

Step 4- Apply a thin layer of Helmar 450 glue to the rim of the bauble. Join the halves back together.

Wooden Star Bauble:

What you'll need:

• Jolly & Joy Fillable Dome Bauble 4 Pack Clear
• Wooden star ornaments
• Hot glue gun and glue sticks
• Mod Podge
• Fake snow

Instructions:

Step 1- Open base of the bauble. Tie a knot in the string of the wooden star ornament, to shorten.

Step 2- Apply a small amount of hot glue to the end of the string and adhere to the inside centre top of the bauble.

Step 3- Apply a small amount of mod podge to the base of the bauble, and fill with fake snow.

Step 4- Screw the base back onto the bauble.

Wooden House Bauble:

What you'll need:

• Jolly & Joy Fillable Dome Bauble 4 Pack Clear
• Wooden house ornaments
• Small tree decorations
• Hot glue gun and glue sticks
• Mod Podge
• Fake snow

Instructions:

Step 1- Open base of the bauble. Use hot glue to attach the house and trees to the base.

Step 2- Apply a small amount of hot glue to the end of the string and adhere to the inside centre top of the bauble.

Step 3- Apply a small amount of mod podge along the roof of the house to attach some fake snow.

Step 4- Fill the lid of the bauble with desired amount of fake snow. Screw the base back onto the bauble and flip back right way up.