HELLO KITTY NURSERY SET

Instructions

Read all instructions carefully before commencing the project.

Cutting for Blanket

Step 1 - Cut a piece of flannelette 1.10m x 1.10m

Step 2 - Cut your minky dot just slightly bigger.

Blanket

Step 1 - Place the flannel square and the minky square right sides together and pin around the edges. Trim excess minky so that all sides are straight and even with the flannelette. Stitch around all edges, leaving a 20cm opening for turning.

Step 2 - Turn blanket right side out. Pin opening closed.

Step 3 - Topstitch around the blanket close to the edge to secure.

Burp Cloth

Step 1 - Cut a template for burp cloth. Cut 1 piece out of each fabric.

Step 2 - Place the fabrics right sides together and pin around the edges.

Step 3 - Stitch around all edges, leaving a 15cm opening for turning.

Step 4 - Turn burp cloth right side out. Pin opening closed.

Step 5 - Topstitch around the burp cloth close to the edge to secure.

Bib

Step 1 - Cut template for the bib.

Step 2 - Cut 1 bib out of each fabric

Step 3 - Place pieces right sides together, pin all around.

Step 4 - Sew around bib with a 1cm seam allowance leaving a 15cm gap at bottom of bib for turning.

Step 5 - Clip around all curves. Turn right side out.

Step 6 - Topstitch around the blanket close to the edge to secure.

Step 7 - Attach a snap, Popper or Velcro at neck closure ends.