LICENSE FABRIC MASK
WHAT YOU'LL NEED
- 40cm of your favourite licensed themed fabric.
- Sewing machine and matching thread
- 2 x hair elastics
- Hand sewing needle and thread
- Iron and ironing board
Step 1 - Step 1 - Download template and cut out 2 pieces of fabric for each layer. The middle layer can be interfacing or another layer of the cotton fabric. You should have 6 pieces in total once cut out.
Step 2 - Match the right sides of each piece together and sew along the curved edge with a 1cm seam allowance.
Step 3 - Snip into seam allowance of the curved seams and press open.
Step 4 - Pin the outer layers together with right sides facing in. Then add the middle layer to the outside and pin all 3 layers together. This will ensure the middle layer ends up on the inside once finished.
Step 5 - Sew around the top and bottom edges of mask with a 1cm seam allowance. Once complete, turn the mask right side out.
Step 6 - Fold under the seam allowance at each end of the mask and top stitch in place, with a 3mm seam allowance.
Step 11 - Now fold back and pin a 1 cm seam at each end of the mask. Put the hair elastic inside this casing and sew in place. Repeat on other side to create your ear loops.