Level: Easy

WHAT YOU'LL NEED

  • Materials to Cut - Infusible Ink Paper of your choice, we are using Cricut Infusible Ink Transfer Sheet Patterns, Bright Green, Ultraviolet, Jungle Safari - Yellow, Black, Red
  • Design Space apps
  • Cricut EasyPress 2
  • Cricut EasyPress Mat
  • Cricut Explore Air 2 or Cricut Maker
  • Cricut heat resistant tape
  • Cricut ceramic coaster
  • StandardGrip Machine Mat - 12" x 12"
  • Lint roller
  • Butcher paper
  • Tweezer
  • Scissors
  • Weeding tools
  • Design Space Apps and subscription


INSTRUCTIONS

PREPARATION

Step 1 - Go to Cricut Design Space and search project fruit slice coaster.

Step 2 - If you want to alter the project,select Customize, then use the tools in the Edit panel to make changes before you cut.

Step 3 - Be sure to Mirror the mat when using an Infusible Ink Transfer Sheet and place the shiny side (clear liner) down on the mat.

Step 4 - Follow the prompts in Design Space to cut the images from the Infusible Ink Transfer Sheet.

CUT

Step 1 - Be sure to mirror the mat when using an Infusible Ink Transfer Sheet and place the shiny side (clear liner) down on the mat.

Step 2 - Follow the prompts in Design Space to cut the images from the Infusible Ink Transfer Sheet.

Step 3 - Remove the unneeded pieces of vinyl using a Weeder Tool. It is usually easiest to move from the inside out when weeding.

ASSEMBLE

Step 1 - Follow below stacking order:

Stacking Order:

  • Cricut EasyPress 2
  • Butcher paper
  • Cricut Ceramic Coaster Blank
  • Infusible Ink Transfer Sheet design
  • White Cardstock (80 lb) or 4 layers butcher paper
  • Cricut EasyPress Mat

Other Supplies:

  • Lint-free cloth

* Not recommended without Cricut EasyPress Mat

Step 2 - PREPARATION

  • Preheat Cricut EasyPress 2 to 200C
  • Wipe tile with lint-free cloth
  • Cover mat with cardstock to protect surface
  • Preheat tote bag for 15 s
  • Remove butcher paper from top of tote bag

Step 3 - APPLICATION

  • Position design on coaster
  • Place coaster with design face down on cardstock
  • Cover with clean butcher paper
  • Center machine, press with no pressure at 200C for 240 s without moving press
  • Lift press
  • Remove butcher paper

CAUTION - Coaster will be very hot. Let cool completely. Remove coaster from design.

Step 4 - CARE

Wash with warm water and glass cleaner. Do not use steel wool, colored cleansing agents, or scrubbing pads.




altText

BECOME A SPOTLIGHT VIP

Get VIP discounts, attend exclusive events and more