REVERSIBLE FLEECE DOG BED

Instructions:

Step 1- Cut out two Circles with 100cm circumference and two Rectangles 160x25cm.
Tip: This is for a large bed, adjust the size of the circle to suit your own dog.

Step 2- Take the two Rectangles and, with right side of fabric together, pin at short ends. Stitch.
You will now have a large Loop.

Step 3- Take the Loop and fold in half lengthwise, wrong sides together, and pin along edge. Stitch, leaving open a 10cm gap.
Tip: Leave a large seam allowance of 5cm.

Step 4- Stuff the Loop, careful not to overstuff. Stitch the opening closed.

Step 5- Take the Loop and pin to one of the Circles, facing towards the center. Baste together.
Tip: Pin Loop to right side of fabric to have pattern visible, or wrong side of fabric to have the fleecy side visible.

Step 6- Place remaining Circle on top, right side of fabric facing down, Loop should be sandwiched between the pieces. Pin around the edges and stitch, leaving open a 20cm gap.

Step 7- Turn the bed right side out, and stuff with remaining stuffing. Slipstitch opening closed.