Your browser is not supported. | ||
Please browse our site using any of the following options:
| ||
REVERSIBLE FLEECE DOG BED
Level: Easy
What you'll need:
- 2m Bonded Peak Polar Fleece
- Hobby fill
- Sewing Machine and thread
- Scissors
Instructions:
Step 1- Cut out two Circles with 100cm circumference and two Rectangles 160x25cm.
Tip: This is for a large bed, adjust the size of the circle to suit your own dog.
Step 2- Take the two Rectangles and, with right side of fabric together, pin at short ends. Stitch.
You will now have a large Loop.
Step 3- Take the Loop and fold in half lengthwise, wrong sides together, and pin along edge. Stitch, leaving open a 10cm gap.
Tip: Leave a large seam allowance of 5cm.
Step 4- Stuff the Loop, careful not to overstuff. Stitch the opening closed.
Step 5- Take the Loop and pin to one of the Circles, facing towards the center. Baste together.
Tip: Pin Loop to right side of fabric to have pattern visible, or wrong side of fabric to have the fleecy side visible.
Step 6- Place remaining Circle on top, right side of fabric facing down, Loop should be sandwiched between the pieces. Pin around the edges and stitch, leaving open a 20cm gap.
Step 7- Turn the bed right side out, and stuff with remaining stuffing. Slipstitch opening closed.