BLOSSOMS WALL HANGING
WHAT YOU'LL NEED:
- Assorted Ribtex Blossoms - Mix of flowers and leaves
- Arbee Embroidery hoop 20cm
- Tulle Fabric
- E6000 Crystal Clear Glue
Step 1 - Separate the two pieces of your embroidery hoop. Lay tulle fabric over the inner hoop and place larger hoop around the outside.
Step 2 - Tighten the embroidery hoop while holding the tulle fabric taut. Apply glue if you feel it is required to make the tulle secure.
Step 3 - Arrange your blossoms in whatever configuration you find most pleasing. We chose an asymmetrical crescent.
Step 4 - Glue flowers and leaves in place using E6000 Crystal Clear Glue.
Hint: Some blossoms may be on a wire - these can either be trimmed off, or carefully threaded through the tulle and tied together at the back to secure.
Step 5 - Cut any excess tulle from the back of the hoop and wait for glue to dry before hanging.