EASTER BUNNY HEADBANDS & SCRUNCHIES

Instructions

Reference the downloadable project sheet for project pattern diagrams.

Easter Bunny Headband

Cut:

• 2 x Ears on fold
• 1 x 10cm x 5cm

1. Fold the piece of fabric in half, right sides together lengthwise and stitch to the width of your headband. Pull through, insert headband, fold up ends and secure in place.
2. Create the ears. Place the right sides together and stitch around using a 1 cm seam allowance, leaving an opening between the notches. Pull through. Press. Create a loop of florist wire and insert it into the ears, pushing it into the corners. Tie onto the headband.

Easter Ear Scrunchie

Cut

• 2 x Ears
• 1 x 20cm x 60cm

1. Fold the piece of fabric in half, right sides together lengthwise.
2. Sew 1cm seam along the long raw edge, stopping 3cm from each end
3. Turn the tube right side out. Press.
4. Join up the short ends of the fabric to form a loop. Attach a safety pin to one end of the cut elastic. Thread a safety pin through one end of the tube of fabric through to the opposite end. Forming a loop with the elastic, overlap both elastic ends by 1cm and stitch to form a circle with the elastic.
5. Fold in raw edges and top stitch around seam edge.
6. Create the ears. Place the right sides together and stitch around using a 1 cm seam allowance, leaving an opening between the notches. Pull through. Press and tie onto the scrunchie.