SCULPEY MOULD MAKER JEWELLERY

Instructions

Step 1: Prepare Your Space

Set up your crafting area using wax paper, foil, or a metal baking sheet.

Step 2: Prepare the Mould Maker Clay

Cut a piece of Mould Maker Clay slightly larger than your ring. Knead until soft, roll into a ball, and flatten slightly.

Step 3: Make the Impression

Lightly dust both the Mould Maker Clay and the ring with cornstarch. Press the top of the ring firmly into the clay, then carefully lift it out.

Step 4: Bake the Mould

Bake according to the Sculpey Mould Maker instructions. Allow the mould to cool completely before use.

Step 5: Fill the Mould with Sculpey Polymer Clay

Knead the polymer clay (Premo, Sculpey III, or Soufflé) until soft. Dust the mould with cornstarch and press the polymer clay evenly into the impression.

Step 6: Remove Excess Sculpeu

Remove any excess polymer clay with a blade and carefully remove the shaped piece from the mould.

Step 7: Bake the Sculpey

Place the now moulded pieces on a baking sheet and bake according to your polymer clay's instructions.

Step 8: Smooth and Finish (Optional)

Once cooled, sand the edges with fine sandpaper if needed and wipe clean. For added shine, apply Sculpey Gloss Glaze and let it dry.

Step 9: Add Findings

Attach the baked clay pieces to jewellery findings (pendant bases, brooch pins, ring blanks) with strong glue.