SISER HALLOWEEN STICKERS

Instructions

Create your own spooky Halloween stickers using the Siser Printable Vinyl Sticker range and your cutting machine. Perfect for trick-or-treat bags, party favours or decorating!

Tips & Tricks:

• Test cut before using a new material or laminate.
• Use holographic laminate for a shiny, spooky effect.
• Stickers are perfect for treat bags, notebooks, or party invitations.

Step 1 - Choose your designs

Select your favourite Halloween-themed images. Import them into your cutting software as print-and-cut files.

Step 2 - Arrange your sheet

Resize the designs to fit the page. Set registration marks to maximum to use as much space as possible. Add a cut contour around each sticker.

Step 3 - Print your stickers

Load the Siser Matte Printable Vinyl into your inkjet printer. Print on a standard paper setting at draft or standard quality. For best results, allow the ink to dry fully before handling.

Step 4 - Apply laminate (optional)

Place the printed sheet on your cutting mat. Use the hinge method: fold back a few centimetres of laminate backing, line up with the sheet edge, and smooth down with a squeegee while peeling away the backing.

Step 5 - Cut your stickers

Load the cutting mat into your machine. Do a test cut to confirm settings. Adjust speed and pressure if needed, then send the design to cut. The machine will read the registration marks and cut around each sticker.

Step 6 - Weed & remove

Peel away the excess vinyl sheet. Flex the cutting mat so the stickers lift easily without curling.