JOLLY & JOY VELOUR SANTA CUSHION

Jolly & Joy Velour Santa Cushion Project

Level: Beginner

What you'll need:

Measurements

Body Diameter: Approx. 27cm

Boots To Top of Hat: Approx. 55cm

Tension

13sts and 12 rows to 10cm over pattern worked in the round, using 4.50mm hook.

Instructions

Special Abbreviations / Stitches

dc2tog - double crochet 2sts together - *insert hook in next st, yoh and pull up a loop*, rep in next st ... 3 loops on hook, yoh and pull through all loops on hook.


Note: A smaller hook than recommended on the product has been used to achieve firm tension. Parts are worked in continuous rounds. Place stitch marker on last stitch of first round, remove and replace on every round. Arms, Legs & Head are worked onto Body in anticlockwise order.

Instructions in UK Crochet Terms.




Front

Using MC and 4.50mm hook, make a magic ring.

1st Rnd - 8dc, place marker on last st ... 8sts.

2nd Rnd - 2dc in each st around ... 16sts.

3rd Rnd - *1dc in next st, 2dc in next st*, rep to end of rnd ... 24sts.

4th Rnd - *1dc in next 2sts, 2dc in next st*, rep to end of rnd ... 32sts.

5th Rnd - *1dc in next 3sts, 2dc in next st*, rep to end of rnd ... 40sts.

6th Rnd - *1dc in next 4sts, 2dc in next st*, rep to end of rnd ... 48sts.

7th Rnd - *1dc in next 5sts, 2dc in next st*, rep to end of rnd ... 56sts.

8th Rnd - *1dc in next 6sts, 2dc in next st*, rep to end of rnd ... 64sts.

9th Rnd - *1dc in next 7sts, 2dc in next st*, rep to end of rnd ... 72sts.

10th Rnd - *1dc in next 8sts, 2dc in next st*, rep to end of rnd ... 80sts.

11th Rnd - *1dc in next 9sts, 2dc in next st*, rep to end of rnd ... 88sts.

12th Rnd - *1dc in next 10sts, 2dc in next st*, rep to end of rnd ... 96sts.

13th Rnd - *1dc in next 11sts, 2dc in next st*, rep to end of rnd ... 104sts.

14th Rnd - *1dc in next 12sts, 2dc in next st*, rep to end of rnd ... 112sts.

15th Rnd - *1dc in next 13sts, 2dc in next st*, rep to end of rnd ... 120sts.

16th Rnd - *1dc in next 7sts, 2dc in next st, 1dc in next 7sts *, rep to end of rnd ... 128sts, fasten off MC.


Back

Work same as Front but do not fasten off MC.


Right Arm

Cont with MC attached at Back, holding Front & Back with WS together and Front facing, matching beg of rnds in opposite directions, cont working on Front, joining both parts together.

1st Rnd - 1dc in next 22sts on Front, pm on 22nd st on Back from joint, 1dc in 22nd st on Back, 1dc in next 21sts on Back, pm on last st ... 44sts.

2nd Rnd - (dc2tog, 1dc in next 18sts, dc2tog) twice ... 40sts.

3rd Rnd - (dc2tog, 1dc in next 16sts, dc2tog) twice ... 36sts.

4th Rnd - (dc2tog, 1dc in next 14sts, dc2tog) twice ... 32sts.

5th Rnd - (dc2tog, 1dc in next 12sts, dc2tog) twice ... 28sts.

6th Rnd - 1dc in each st to end of rnd ... 28sts, change to C1.

7th Rnd - Using C1, 1dc in each st to end of rnd ...28sts.

8th Rnd - *1dc in next 5sts, dc2tog*, rep to end of rnd ... 24sts.

9th Rnd - *1dc in next 4sts, dc2tog*, rep to end of rnd ... 20sts.

10th Rnd - *1dc in next 3sts, dc2tog*, rep to end of rnd ... 16sts.

11th Rnd - *1dc in next 2sts, dc2tog*, rep to end of rnd ... 12sts.

12th Rnd - *1dc in next st, dc2tog*, rep to end of rnd ... 8sts, fasten off C1.

Using yarn needle, run yarn end through rem sts and pull tight.


Right Leg

1st Rnd - Attach MC to next st on Front following Right Arm, 1ch (does not count as a st), 1dc in same st, 1dc in next 25sts (26sts on Front), pm on 26th st on Back from Right Arm, 1dc on Back into st just marked, 1dc in next 25sts, (26sts on Back) ... 52sts for Left Leg, pm on last st.

2nd Rnd - (dc2tog, 1dc in next 22sts, dc2tog) twice ... 48sts.

3rd Rnd - (dc2tog, 1dc in next 20sts, dc2tog) twice ... 44sts.

4th Rnd - (dc2tog, 1dc in next 18sts, dc2tog) twice ... 40sts.

5th Rnd - (dc2tog, 1dc in next 16sts, dc2tog) twice ... 36sts.

6th Rnd - (dc2tog, 1dc in next 14sts, dc2tog) twice ... 32sts.

7th Rnd - (dc2tog, 1dc in next 12sts, dc2tog) twice ... 28sts, change to C2.

8th Rnd - Using C2, 1dc in each st to end of rnd ...28sts.

9th Rnd - *1dc in next 5sts, dc2tog*, rep to end of rnd ... 24sts.

10th Rnd - *1dc in next 4sts, dc2tog*, rep to end of rnd ... 20sts.

11th Rnd - *1dc in next 3sts, dc2tog*, rep to end of rnd ... 16sts.

12th Rnd - *1dc in next 2sts, dc2tog*, rep to end of rnd ... 12sts.

13th Rnd - *1dc in next st, dc2tog*, rep to end of rnd ... 8sts, fasten off C2.

Using yarn needle, run yarn end through rem sts and pull tight.


Left Leg

1st Rnd -Attach MC to next st on Front following Right Leg, 1ch (does not count as a st), 1dc in same st, 1dc in next 25sts (26sts on Front), pm on 26th st on Back from Right Leg, 1dc on Back into st just marked, 1dc in next 25sts, (26sts on Back) ... 52sts for Right Leg, pm on last st.

2nd - 13th Rnd - Work as for Right Leg.

Using yarn needle, run yarn end through rem sts and pull tight.


Left Arm

1st Rnd -Attach MC to next st on Front following Left Leg, 1ch (does not count as a st), 1dc in same st, 1dc in next 21sts (22sts on Front), pm on 22nd st on Back from Left Leg, 1dc on Back into st just marked, 1dc in next 21sts, (22sts on Back) ... 44sts for Right Arm, pm on last st.

2nd - 12th Rnd - Work as for Right Arm.

Using yarn needle, run yarn end through rem sts and pull tight.


Head & Hat

Beg Collar -

1st Rnd - Attach C1 to next st on Front following Left Arm, 1ch (does not count as a st), 1dc in same st, 1dc in next 31sts to Right Arm (32sts on Front), 1dc in each st on Back to Left Arm (32sts on Back) ... 64sts for Head, pm on last st.

2nd Rnd - (dc2tog, 1dc in next 28sts, dc2tog) twice ... 60sts.

3rd Rnd - (dc2tog, 1dc in next 26sts, dc2tog) twice ... 56sts.

4th Rnd - (dc2tog, 1dc in next 24sts, dc2tog) twice ... 52sts.

5th Rnd- (dc2tog, 1dc in next 22sts, dc2tog) twice ... 48sts, change to C3.

Begin Stuffing all parts up to Head and cont doing for rem.

Beg Face -

6th - 12th Rnd - Using C3, 1dc in each st ... 48sts, change to C1.

Beg Hat Brim -

13th & 14th Rnd- Using C1, 1dc in each st ... 48sts, change to MC.

Beg Hat -

15th Rnd - Using MC, 1dc in each st ... 48sts.

16th Rnd - (1dc in next 10sts, dc2tog) 4 times ... 44sts.

17th Rnd - (1dc in next 9sts, dc2tog) 4 times ... 40sts.

18th Rnd - (1dc in next 4sts, dc2tog, 1dc in next 4sts) 4 times ... 36sts.

19th Rnd - (1dc in next 7sts, dc2tog) 4 times ... 32sts.

20th Rnd - (1dc in next 3sts, dc2tog, 1dc in next 3sts) 4 times ... 28sts.

21st Rnd - (1dc in next 5sts, dc2tog) 4 times ... 24sts.

22nd Rnd - (1dc in next 2sts, dc2tog, 1dc in next 2sts) 4 times ... 20sts.

23rd Rnd - (1dc in next 3sts, dc2tog) 4 times ... 16sts.

24th Rnd - (1dc in next st, dc2tog, 1dc in next st) 4 times ... 12sts.

25th Rnd - (1dc in next st, dc2tog) 4 times ... 8sts, change to C1.

Beg Hat Bobble -

26th Rnd - Using C1, 1dc in each st ... 8sts.

27th Rnd - 2dc in each st ... 16sts.

28th Rnd - 1dc in each st ... 16sts.

Cont adding Fibre Fill up to the end.

29th Rnd - (dc2tog) 4 times ... 8sts.

30th Rnd - (dc2tog) 4 times ... 4sts, fasten off.

Using yarn needle, run yarn end through rem sts and pull tight.


Beard

Large Spikes (make 5) -

Using C1 and 4.50mm hook, make a magic ring.

1st Rnd - 4dc, pm on last st.

2nd Rnd - (1dc in next st, 2dc in next st) twice ... 6sts.

3rd Rnd - (1dc in next 2sts, 2dc in next st) twice ... 8sts.

4th Rnd - (1dc in next 3sts, 2dc in next st) twice ... 12sts.

5th Rnd - 1dc in each st ... 12sts, fasten off.

Small Spikes (make 2) -

As large Spikes up to 4th Rnd ... 12sts. Do not fasten off yarn on 2nd Small Spike, pm on last st.

Join Spikes -

Next Rnd - Cont with yarn attached to 2nd Small Spike, 1dc in next 6sts, (1dc in next 6sts of Large Spike) 5 times, 1dc in next 12sts of 1st Small Spike, (1dc in next 6sts of Large Spike) 5 times, 1dc in next 6sts of 2nd Small Spike ...84sts, all Spikes joint.

Next Rnd - 1dc in next 5sts, (dc2tog, 1dc in next 4sts) 5 times, dc2tog, 1dc in next 10sts, (dc2tog, 1dc in next 4sts) 5 times, dc2tog, 1dc in next 5sts ... 72sts.

Next Row - 1dc in next 36sts (leaving next 36sts unworked).

Fasten off, leaving long tail for sewing.


Moustache (make 2 sides)

Using C1 and 4.50mm hook, make a magic ring.

1st Rnd - 4dc, pm on last st ... 4sts.

2nd Rnd - (1dc in next st, 2dc in next st) twice ... 6sts.

3rd Rnd - (1dc in next 2sts, 2dc in next st) twice ... 8sts.

4th & 5th Rnd - 1dc in each st ... 8sts.

6th Rnd - (dc2tog) 4 times ... 4sts.

Fasten off, leaving tail for sewing.


Nose

Using C3 and 4.50mm hook, make a magic ring.

1st Rnd - 4dc, pm on last st ... 4sts.

2nd Rnd - 2dc in each st around ... 8sts.

3rd Rnd - 1dc in each st ...8sts.

4th Rnd - (dc2tog) 4 times ... 4sts.

Fasten off, leaving tail for sewing.


Belt

Using C2 and 4.50mm hook, make 41ch.

1st Row - 1dc in second ch from hook, 1dc in each ch to end, turn ... 40sts.

2nd & 3rd Row - 1ch, 1dc in each st, turn ... 40sts.

Fasten off, leaving tail for sewing.


Belt Buckle

Using C3 and 4.50mm hook, make 20ch, slst in 1st at beg creating a loop.

1st Rnd - 1ch, 1dc in each st, slst in 1st st at beg ... 20sts.

Fasten off, leaving tail for sewing.


Finishing

Using yarn ends attached, stitch joints closed between all parts of Body. Using yarn end attached, overstitch Beard opening while pushing loose ends between layers as stuffing. Place and stitch Beard (with slanted edge onto Head), Nose and Moustache on Head. Place and stitch Belt over Front of Body. Mould Belt Buckle over Belt and sew in place. Embroider Eyes and Brows. Sew in loose ends.

altText

BECOME A SPOTLIGHT VIP

Get VIP discounts, attend exclusive events and more