PERSONALISED NAME STICKERS & BOOK BAG

INSTRUCTIONS

VINYL STICKERS

Step 1 - If you subscribe to Cricut Design Space access, search this projects name. SPOTLIGHT Back to School - DINO, SPOTLIGHT Back to School - UNICORN

Or follow the below link:

STICKER - DINO: https://design.cricut.com/landing/project-detail/5f7ee6b631751a0e502499cb

STICKER - UNICORN: https://design.cricut.com/landing/project-detail/5f7ee6962b6927077ce453b2

Step 2 - Click customize to add your text by using the text tool, and a favorite font.

Step 3 - Make sure your font is on print and not cut, then flatten it to the design and send to print by clicking the green Cricut in the toolbar.

Cut

Step 4 - After the design prints on the vinyl, place it on the cutting mat and send into the explore to cut.

Assemble

Step 5 - Once the design is cut, weed them out, and start sticking them to books!

PERSONALISED BOOK BAG

PREPARATION

Step 1 - If you subscribe to Cricut Design Space access, search this projects SPOTLIGHT CRAFTERS CHOICE back to school tote bag

Or follow this link: https://design.cricut.com/landing/project-detail/5f8b8a433309a707c07e8c29

Step 2 - If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut. Otherwise click Make it

CUT

Step 1 - Be sure to Mirror the mat when using an Infusible Ink Transfer Sheet and place the shiny side (clear liner) down on the mat.

Step 2 - Follow the prompts in Design Space to cut the images from the Infusible Ink Transfer Sheet.

ASSEMBLE

Step 1 - Follow the listed stacking order.

Stacking Order:

• Cricut EasyPress 2
• Butcher paper
• Infusible Ink Transfer Sheet design, face down
• Cricut Tote Bag Blank

Inside Cricut Tote Bag:

• White cardstock (80 lb) or 4 layers butcher paper
• Cricut EasyPress Mat

Other Supplies:

• Lint roller
• Tweezers

Not recommended without Cricut EasyPress Mat.

Step 2 - PREPARATION

• Preheat Cricut EasyPress 2 to 195C
• Place mat inside tote bag
• Insert cardstock on top of mat inside tote bag to prevent bleed through
• Lint roll tote bag
• Cover tote bag with butcher paper larger than heat plate
• Preheat tote bag for 15 s
• Remove butcher paper from top of tote bag

Step 3 - APPLICATION

• Place design face down, liner side up
• Cover with clean butcher paper larger than heat plate
• Press with light pressure at 195C for 40 s
• Slowly lift press
• Slowly remove butcher paper
• Slowly remove liner while warm

Note: If transfer sheet remains on shirt, remove with tweezers.

Step 4 - CARE

• Machine wash inside out with cold water and mild detergent
• Tumble dry low or line dry
• Do not use fabric softener, dryer sheets, or bleach