STOMP QUILT

Stomp Quilt Project

LEVEL: INTERMEDIATE

WHAT YOU'LL NEED

  • Fabrics are from Stomp range
  • 2.3m Fabric A - Patch, multi
  • 90cm Fabric B - Stripe, multi
  • 40cm Fabric C - Footprints, cream
  • 60cm Fabric D - Tossed Animals, yellow
  • 90cm Fabric E - Dot Stripe, multi (includes binding)
  • 3.5m Stomp fabric of choice or 1.5m x 250cm wide
  • Backing fabric of choice
  • 1.5m x 250cm wide Sew Easy double-sided fusible, cotton/bamboo batting
  • Matching Gutermann 100% cotton thread
  • Rotary cutter, mat & quilters rulers
  • Quilting pins, tape measure
  • Scissors, seam ripper
  • Hand needle
  • Sewing machine with 1/4 in foot & walking foot.

All fabrics should be 100% cotton, washed & pressed. 1/4 inch seam allowance used throughout unless otherwise indicated. Read all instructions carefully before commencing the quilt.

INSTRUCTIONS

CUTTING

All strips are cut across the width of fabric unless otherwise stated.
From Fabric A

  • Fussy cut two 9" x 34 1/2" strips for the top and bottom outer borders
  • Fussy cut two 9" x 69 1/2" strips down the length of the fabric for the side borders

From Fabric B

  • Fussy cut two 9 1/4" x 30 1/2" strips

From Fabric C

  • Cut 5 x 2 1/2" strips, sew strips together to make one long strip, crosscut into two 30 1/2" long strips for top and bottom inner borders, and two 52"" long strips for side inner borders

From Fabric D

  • Cut 3 x 6 1/2" strips, crosscut into 3 x 30 1/2" strips

From Fabric E

  • Cut 6 x 2 1/2" strips, crosscut into 6 x 30 1/2" strips cut 6 x 2 1/2" strips for binding

QUILT ASSEMBLY

(Refer to the quilt diagram while assembling)

BODY OF QUILT

1. Sew together horizontal rows from top to bottom as follows -
Row 1: 2 1/2" x 30 1/2" E strip
Row 2: 6 1/2" x 30 1/2" D strip
Row 3: 2 1/2" x 30 1/2" E strip
Row 4: 9 1/4" x 30 1/2" B strip
Row 5: 2 1/2" x 30 1/2" E strip
Row 6: 6 1/2" x 30 1/2" D strip
Row 7: 2 1/2" x 30 1/2" E strip
Row 8: 9 1/4" x 30 1/2" B strip
Row 9: 2 1/2" x 30 1/2" E strip
Row 10: 6 1/2" x 30 1/2" D strip
Row 11: 2 1/2" x 30 1/2" E strip
Press all seams in one direction.

INNER BORDER

2. Sew one 2 1/2" x 30 1/2" C strip to the top and bottom of the quilt. Press seams towards border.
3. Sew one 2 1/2" x 52" C strip to each side of the quilt. Press seams toward border.

Outer Border

4. Sew one 9" x 34 1/2" A strip to the top and bottom of the quilt. Press seams towards border.
5. Sew one 9" x 69" A strip to each side of the quilt. Press seams towards border.

FINISHING

Note - If using Stomp fabric for backing prepare backing with a horizontal seam to measure 59" x 76 1/2" .
6. Fuse batting between quilt top and backing or layer the backing, batting and quilt top and baste together. Quilt as desired.
7. Join the 6 x 2 1/2" binding strips on the bias to make one long strip. Press in half lengthwise and bind mitering corners. Attach a label or sign and date your quilt.

altText

BECOME A SPOTLIGHT VIP

Get VIP discounts, attend exclusive events and more