 | ||
| Your browser is not supported. | ||
|
Please browse our site using any of the following options:
| ||
TULLE EARRING HOLDER
Level: Easy
What You'll Need:
- Embroidery hoop in desired size
- 5m or enough to cover your embroidery hoop of tulle or mesh - we used gold metallic mesh
- 5m of backing fabric - we used black faux suede
- Scissors
- Needle and thread
- Hot glue gun
INSTRUCTIONS
Step 1 - Using the embroidery hoop as a guide, cut a circle of each of the fabrics. The circle should be about 4cm bigger than the embroidery hoop.
Step 2 - Over the embroidery hoop without the join, place the base fabric, then the mesh fabric.
Step 3 - Secure the fabric using the second hoop and tighten the screw join.
Step 4 - On wrong side of embroidery hoop, pull excess fabric to create a tight surface on right side.
Step 5 - Using needle and thread. Tack the mesh and base fabric together on the wrong side. Pull thread tight, this should make the fabric bunch in.
Step 6 - Hot Glue Gun the bunched fabric to the inside of the wooden embroidery hoop.
Step 7 - Arrange your earrings through the mesh holes and hang on the wall!
