Night Light Santa Engraving Project

Level: Easy

What you'll need:

  • 1 Piece Acrylic Light Panel
  • StrongGrip Machine Mat - 12" x 12"
  • Engraving Tip + QuickSwap Housing
  • Masking Tape

Finished Size

Approximately 5.9" x 3.8" (15 cm x 10 cm)



Step 1 - If you want to alter the project, select Customise, then use the tools in the Edit panel to make changes before you engrave. Be sure to Mirror your project on the mat before you cut.

Step 2 - To personalise the text of this project, use the text tool to create the text using a font you like, ie: Free font "Cartoon Blocks Christmas font" and type in your desired letters. Use the Attach option to preserve the arrangement of text and Santa Image before cutting.


Step 1 - Use masking tape to securely attach the Acrylic Panel blank to the center of the StrongGrip mat, using the grid to align it to the center of the mat.

Step 2- Use the Mat Preview screen to move the engraved image to the center position where the blank is on the

TIP: If using the IOS App, you can alternately use the SnapMat feature to position the design for your blank.

Step 3 - Use the correct material cut setting and Engraver Tool to engrave the mirrored design onto the Acrylic Panel blank. The design is set to 2 passes on the Text and 3 passes on the on Image.


Step 1 - Assemble the Acrylic Panel blank with the engraving to the front on an LED Light Base (External Purchase) and enjoy!



Get VIP discounts, attend exclusive events and more