STAR WARS BABY BLOCKS

INSTRUCTIONS

Step 1 - Cut your fabrics for each block you will need 6 - 3.5" squares

• Star Wars grey chibbi minky fleece x 2
• Star Wars chibbi blocks x 2 - this print can be fussy cut to have 4 icons within the square, make sure to line your ruler up and cut ¼ seam allowance around the 4 icons you have chosen - see finished image for guidance)
• Organic cotton navy quilters x 1
• Organic cotton off white quilters x 1

NOTE - Use a 1/4″ seam allowance when sewing the squares together. Leave 1/4″ at the start and end of each side, you will use that 1/4″ to attach one square to another.

Step 2 - Sew the 4 Star Wars print squares together into a row of 4 alternating each print. Sew one navy square to the top of the second square in the row, and the off-white square to the bottom.

Step 3 - Bring the sides up one at a time and stitch them together until you have a cube. Leave a 1.5″ opening between two of the squares for turning and stuffing.

Step 4 - Clip the corners to reduce bulk, then turn the block right side ouy.

Step 5 - Stuff with hobby fill and use a ladder stitch to close the opening.