GLASS COAT LIQUID GLOSS DIY TRINKET DISH

Instructions

Step 1 - Prepare your working area and trinket dish mold by wiping them clean. Place the Glass Coat protective mat on the working area for surface protection.

Step 2 - Before pouring any resin into the mould, to create an embellishment layer spread a layer of gold foil into the mould to your desired effect.

Step 3 - Make up a resin mix in each of the three measuring cups provided by adding 20ml liquid gloss part A and 20ml liquid gloss part B in one measuring cup, mix well with mixing stick provide. Repeat in the other 2 cups.

Step 4 - Add a small drop of white paint in the first cup, a small drop of red paint in the second cup, a small drop of white paint and red paint in the third cup then mix each cup well with the mixing sticks provided.

Step 5 - Pour the mixtures created into the trinket dish mould to create your own unique pattern design.

Step 6 - Allow 48hrs for setting. Once set remove from mould.

**Please read the enclosed information sheet carefully. It fully explains how to use your liquid gloss for best results. Remember to wear eye protection and protective gloves whilst mixing and using.