![]() | ||
| Your browser is not supported. | ||
|
Please browse our site using any of the following options:
| ||
CONVERTING A ONE-WAY S-FOLD CURTAIN DRAW TRACK INTO CENTRE OPENING S-FOLD TRACK
Instructions
S-Fold curtains create a seamless, modern, and sophisticated look in any home. But what happens when you need to access a sliding door or window in the middle? You don't need a whole new system - you can easily convert your existing continuous track into a centre-opening split system in just a few simple steps.
Step 1 - Remove one end cap
Take off the end cap from one end of the track. The end that is not secured.
Step 2 -Cutting the gliders
Important: You must have an even number of gliders either side to fit the S-Fold curtain. Each track purchased from Spotlight has an additional glider for a curtain wand. If you wish to have two curtain wands either side of your curtain, then you can purchase additional gliders from Spotlight, and rethread your S-Fold curtain with an additional glider to accommodate.
To cut the gliders, count the total number of gliders on the track and locate the centre point. Cut the cord between the two centre gliders, ensuring the gliders are evenly split between the left and right sides.
Step 3 - Install end stops
Secure the loose cord, mirroring the opposite end, secure one of the gliders within the anchor point. This can be done by unscrewing the end point and securing one of the gliders into position, re tightening the screw. This will create two secure openings.
Replace the end stop on the second anchor point.
Step 4 - Hang the curtains
Attach the 2 S-Fold curtain panels, one on the left and one on the right as per S-Fold instructions.
You may need to custom your curtains to fit the track. As a rule of thumb, we have designed our S-Fold curtains to be two times the curtain track width, to create the perfect S-Fold waves.
E.g. 300cm Track = 300cm Ready Made S-Fold Curtain. Actual Curtain Size: 600cm.
Split 300cm Track = 2 x 150cm Ready Made S-Fold Curtain. Actual Curtain Size: 300cm. If you are using rolled fabric, use the flat measurement of 2 x 300cm
Test operation
Draw both panels from the centre to each side, installing a curtaining within each glider opening if required. Curtain wands are available within your Spotlight store.
